Our Blog

Your smile is just about perfect. There’s just that one tooth that’s out of place. So, do you really need to see an orthodontist?

Absolutely! Why? There are several good reasons.

First, let’s check to make sure there is no physical problem causing that turned tooth. A crooked tooth might result from an early oral trauma while the tooth is developing, or a baby tooth lost too early, or the loss of a nearby adult tooth. But a sudden change in a tooth’s orientation might also be caused by a cyst or a tumor. If you notice any changes in your tooth’s position, it’s a good idea to talk to Dr. Joseph Brogan.

Second, we want to make sure your bite is aligned properly. If your tooth is crooked due to crowding by your other teeth, or if it has rotated a bit because there is too much space between your teeth, your bite might be affected as well. Malocclusions, or bad bites, can lead to a number of unpleasant consequences, including headaches, jaw pain, and increased pressure and stress on the teeth.

Third, a crooked tooth can lead to more difficulty brushing and flossing between and around the teeth, which increases the chance of tooth decay.

Fourth, we provide the professional medical care you need. Some people with a turned tooth attempt self-help with rubber bands, dental floss, or other home remedies. Not only is this unlikely to work, it can actually lead to infection, root problems, and even tooth loss.

Maybe there are no health concerns causing, or caused by, your crooked tooth. Your bite is strong, and you like your unique smile just the way it is. In that case, smile on!

But if you are interested in aligning that one crooked tooth with the rest, give our Philadelphia, PA office a call, and we’ll get to the root (literally!) of the problem. Depending on the reason your tooth is twisted, we’ll suggest the braces or clear aligners that will provide your most effective orthodontic treatment, and give you safe and lasting options for achieving the smile you’ve always wanted. Perfect!

As you near the end of your orthodontic treatment, you’re probably already imagining the day when your brackets and wires finally come off. Or the moment you’ve finished with your last set of aligners. That day might come just a bit sooner if Dr. Joseph Brogan and our team recommend a positioner.

While not as well-known as other orthodontic treatments, a positioner is an appliance that can shorten your time in traditional braces and aligners by weeks or even months. Curious? Read on!

• What Exactly Is a Positioner?

A positioner resembles a clear mouthguard. Its arched shape is designed to fit snugly over your teeth. It’s sometimes called a finishing appliance, because it’s designed to make those last small adjustments to your alignment and bite. If you’re a good candidate for a positioner, it can replace your braces or aligners for your last several weeks or months of treatment.

• How Are Positioners Made?

This appliance is custom fabricated to fit your very specific orthodontic needs. Commonly, a mold is made of your teeth. A model of your teeth is made from this mold. Precision instruments are used to move the model teeth into your ideal alignment.

Once this model of your future finished smile is complete, it is used to create the positioner. When the thermoplastic material is molded to the model, it creates an appliance with an indentation for each individual tooth in its desired final location.

Available in a variety of materials, a positioner is most often designed as a clear single piece, covering both your upper and lower teeth. This makes sure that your teeth are not only aligned properly, but that your upper and lower teeth are working together for a healthy bite. Openings in the positioner provide airways which allow you to breathe easily.

• How Do Positioners Work?

Because your teeth haven’t settled firmly into place yet (this will happen as you wear your retainer), they’re still able to move. That’s why your positioner is shaped to fit your teeth in their future ideal placement, not where they are at present.

Positioners require your active participation. Your teeth move to the ideal spots molded into the positioner through “exercise”—biting down on your appliance for 15-20 seconds before relaxing your bite, usually every 10-15 minutes during your daily wear. The gentle force provided by your jaw muscles helps guide your teeth into position more quickly. Dr. Joseph Brogan will give you instructions on just how to—and how often to—do these exercises.

• How Long Are They Worn?

Positioners are commonly worn at least four hours a day to start with and all night long, or Dr. Joseph Brogan might recommend 24 hour a day wear for the first week. As you progress, you’ll wear them for shorter periods during the day, gradually tapering off until your treatment is complete.

Depending on the amount of correction that’s still needed, positioner use ranges from several weeks to several months. One thing that will ensure that your time in a positioner is as short as it can be is your willingness to follow our instructions. The speed and effectiveness of your final tooth movements is largely up to you!

• Caring for a Positioner

Gentle treatment is best. Clean your positioner before and after wearing it using a toothbrush and mild toothpaste. Never boil it or expose it to heat. We will give you instructions for how to clean it more thoroughly, if needed.

Like retainers, clear aligners, and mouthguards, a positioner needs to be protected when it’s not in your mouth. Your positioner will come with a case, so be sure to use it!

Positioners aren’t recommended for every orthodontic patient. But if you feel this might be an option worth pursuing, talk to us when you visit our Philadelphia, PA office. A positioner could be an effective, time-saving step on your path to a lifetime of healthy smiles.

Whenever we bite down, we’re applying force with our jaw muscles. Functional appliances direct these forces to create healthier tooth and jaw alignment. They’re used to help correct bite problems and to encourage symmetrical jaw growth.

Functional appliances aren’t always necessary. Because every child’s teeth and bite are different, orthodontic treatment at our Philadelphia, PA office is carefully tailored to your child’s individual needs.

• For the child with minor tooth misalignment, traditional braces or aligners might be all that’s needed.
• For the child with a minor malocclusion, or bite problem, an orthodontist might use elastics (rubber bands) to bring teeth into healthy alignment.
• For the child who has a more serious malocclusion, involving both tooth and jaw alignment, an orthodontist might recommend a functional appliance.

A severe Class II malocclusion can be caused when the upper jaw or teeth are positioned too far forward, and/or the lower jaw is too small or positioned too far back. Common Class II malocclusions include:

• Open bite—the front teeth don’t touch when the back teeth bite down, or the back teeth don’t touch when the front teeth close.
• Overbite—some overbite is normal. A deep overbite occurs when the upper teeth significantly overlap the lower teeth.
• Overjet—the upper front teeth protrude further horizontally than they should.

Today’s functional appliances come in a variety of designs to treat Class II malocclusions. They can be fixed or removable. They can be used with or without braces. Some are designed to expand the upper palate to make sure there’s room for all the permanent teeth. What they all do is advance the position of the lower teeth and jaw to create a healthier, more comfortable bite.

Fixed devices are attached to the teeth and meant to be used full-time. These include the Forsus™ device, the Herbst® appliance, and the MARA appliance.

• Forsus Device

This appliance works with braces. A spring coil rod is most often attached to bands on the first molars on the upper jaw. It’s then connected to the arch wire on the lower jaw. Just like elastics—but more effective!—these spring coil rods provide gentle forward pressure that encourages the lower jaw and teeth forward.  

• Herbst Appliance

The Herbst appliance also applies forward pressure to the lower jaw using telescoping rods connecting the upper and lower teeth. The rods expand as the mouth opens, and telescope together as it closes, positioning the lower jaw further forward while the upper jaw is held back. The Herbst can be worn alone or with braces, and can also be used to expand the upper palate.

• MARA Appliance

The MARA (Mandibular Anterior Repositioning Appliance) uses an adjustable “elbow” piece connecting bands on upper and lower molars to guide the lower jaw and teeth forward when the jaw closes.

Removable appliances such as Bionator and Twin Block appliances can also improve Class II malocclusions. They are meant to be worn for a specific number of hours each day, and can be taken out for sports or other activities as needed. Because it’s essential to get all the necessary hours in, removable appliances require commitment!

• Bionators

A bionator is made of wire and acrylic, and it looks a lot like a retainer. The wire fits around the upper front teeth. It’s attached to a smooth piece of acrylic that sits behind the upper teeth and is shaped to guide the lower jaw forward when biting down. The bionator can also be adjusted to expand the upper palate.

• Twin Block Appliance

The twin block appliance uses two separate pieces made of wire and smooth acrylic. Both pieces are modeled to fit precisely over the upper and lower arches. The acrylic “blocks” fit over the biting surfaces of the teeth, working together like a 3D puzzle. When your child bites down, the upper blocks slide into place behind the lower blocks, pushing the lower jaw and teeth forward. The top plate can also be adjusted to expand the upper palate if needed.

Because these appliances are best used while a child’s bones are still growing and developing, dentists and orthodontists recommend an orthodontic evaluation by age seven. Early treatment with a functional appliance can help correct serious bite problems before or together with braces. In some cases, functional appliances may reduce the need for headgear or surgery.

Todays’ orthodontic technology has made functional appliances more comfortable and efficient than ever before. Talk to Dr. Joseph Brogan to discover how an individualized treatment plan and a custom appliance can give your child a healthy bite and a lasting smile.

Perhaps you’ve heard from parents or older relatives what braces used to be like years ago—obvious, uncomfortable, hard to clean, and with inevitable tooth extractions to start off the whole lengthy process.

Today, brackets are much smaller and wires are more pliable. You can even choose ceramic brackets or clear aligners for an almost invisible effect. New tools make cleaning your braces easier than ever. And new braces technology means that treatment is often shorter. But what about extractions? Are they still inevitable?

For orthodontists like Dr. Joseph Brogan, the objective is saving teeth. And modern practices and technology have made this goal more attainable than ever before. There are several ways that modern treatment procedures can help avoid extractions.

• Early Intervention

We recommend that children visit our Philadelphia, PA office for an orthodontic evaluation by age seven. Because a child’s jaw is still forming at this age, early intervention can lead to orthodontic treatment that expands the jaw in order to make room for permanent teeth, or starts correcting bite problems before they become more serious.

• High-Tech Planning

Today’s technology allows us to map out the progression of your treatment before we begin. Scanners, X-rays, and computer programs help us to design a treatment plan which will accurately predict how best to move your teeth and correct your bite, taking into account the size and development of your teeth and jaw.

• Surgical Options

By the time you reach your late teen years, the jaw bones have stopped growing and it’s no longer possible to expand them without surgery. Oral surgery can treat serious jaw problems that impact your teeth and bite, usually as part of a combined treatment plan designed by your orthodontist and your oral surgeon.

Because we always work to keep teeth intact—using these methods and others—you can be sure that, if we recommend extraction, it is absolutely necessary. What could make an extraction necessary?

• Severe overcrowding. Sometimes, there’s just not enough room in the jaw for all of your teeth.
• A tooth or teeth that prevent us from correcting a problem with your bite.
• Wisdom teeth. Usually, orthodontic work takes place before a patient’s wisdom teeth start to erupt. If yours do make an appearance before or during treatment, we can adapt our treatment plan accordingly.
• An extra tooth. It’s rare, but an extra, or supernumerary, tooth sometimes develops, and your jaw is not designed to accommodate extras!

It’s important that you talk to Dr. Joseph Brogan about every step of your treatment, including extractions. We want you to understand the treatment plan which will give you your best outcome. If we recommend extraction, it is because this decision is the best way to achieve a healthy bite and alignment, creating your beautiful smile—and protecting it—for a lifetime.